Lenses & Reflectors

From indie Semiconductor Wiki
Revision as of 10:49, 27 November 2019 by Jane (talk | contribs)
Jump to navigation Jump to search


Contents

1 Lenses

Any lens that works for other electromagnetic waves can work for radar, for example, LED lenses. Typically, lenses are made from a plastic or acrylic material and come in different sizes and forms. The size and form is important to

  • focus the beam - achieve a collecting or diffusing effect,
  • increase the gain of the signal (usually around 10 dB, maybe more),
  • adapt the coupling into air or other media.

Our evaluation kits and some lenses already have holes to mount them. Other lenses might have to be glued to the front end or mounted in another way. If you need lenses, please contact our sales team. We also provide the lens data on request. Some lenses are shown in Figure 1.

 
Figure 1: Different lenses

2 Reflectors

LED reflectors are very suited to be used for our radars. These reflectors can increase the gain of the signal more than lenses because any side lobes are redirected to the main viewing direction of the radar. We tested, for example, the following ranges (for big targets like buildings) in some quick experiments

  • 140 m with a reflector on the SiRad Simple (120 GHz),
  • 200 m with a reflector on the SiRad Easy.

Typically, LED reflectors are made from a plastic material covered with metal and are available in different sizes. Bigger reflectors usually lead to higher gain. Reflectors mostly need to be glued to the radar (hot glue works just fine). However, care must be taken not to shortcut any signals on the radar with the metal cover of the reflector. We found the reflectors by TE Connectivity to be very suitable, for example, TE Connectivity 1-2154430-1, available from Mouser.

 
Figure 2: Different reflectors